Unravelling Sound Acoustics with Building Compliance Testing’s Guide
In this blog post you can explore our sound guide to acoustics. Understanding sound and vibration is fundamental, even if the intricacies elude us. Most of us grasp the concept that sound travels in waves, generated, for instance, by the collision of objects. Delving deeper into this realm leads us into the fascinating field of acoustics.
What is Sound?
So, what exactly is sound? In simple terms, it’s the sensation perceived by living beings when waves propagate through the air, reaching our ears and interpreted by our brains. Our brains discern the disparity between normal air pressure and the fluctuations caused by these waves, translating them into what we hear.
Visualizing these sound waves is akin to observing ripples on a serene pond when a stone is cast. Much like how the ripples spread outward from the disturbance in the water, sound waves radiate in all directions from their source in the air.
This phenomenon occurs because energy from the sound source disperses into the air, causing air particles to move and collide, akin to a chain reaction of falling dominoes.
While the analogy of ripples on water simplifies the concept, it’s crucial to recognize that our surroundings are three-dimensional. Thus, sound waves propagate not just on a flat surface but in all directions, as depicted in the following illustration.
What is Noise?
Simply put noise is unwanted sound. Specially, noise pollution refers to excessive or unreasonable noise that interferes with an individual’s right to enjoy their property or quality of life. It can include various sounds that are prejudicial to health or cause a nuisance.
Acoustic Consultancy Environmental Protection
Under the Environmental Protection Act 1990, local councils in England must address complaints about noise that qualifies as a statutory nuisance. For noise to be considered a statutory nuisance, it must either unreasonably and substantially interfere with the use or enjoyment of a home or other premises, or it must injure health or be likely to do so.
When councils agree that a statutory nuisance exists, they serve an abatement notice requiring the responsible party to stop or restrict the noise. Keep in mind that statutory noise nuisance laws do not apply to noise from traffic, planes (except model planes), political demonstrations, or premises occupied by the armed forces or visiting forces.
Sound Waves and Frequency
Now, let’s delve into frequency and wavelength. Despite evoking memories of dreary secondary school lessons, these terms are straightforward. Frequency determines a sound’s pitch—the higher the frequency, the higher the pitch. Frequency is quantified in Hertz (Hz), representing the number of wave cycles per second.
Wavelength, on the other hand, measures the distance between successive points on a wave. It’s typically gauged in meters, providing insight into the spatial aspects of sound waves.
Measuring Noise with Pascals
Measuring changes in air pressure involves the familiar unit of Pascals (Pa). The softest audible sound measures a mere 0.00002 Pa, while anything above 20 Pa crosses into the threshold of pain. To simplify these vast differences, acousticians and laypeople alike utilize decibels (dB), employing a logarithmic scale where each increase of ten corresponds to a tenfold increase in sound pressure.
Have a project in mind? Let’s get to work
We hope this brief introduction to sound and acoustics has proven both enlightening and practical. Should you have any questions or suggestions, please don’t hesitate to contact us.
We’re friendly and knowledgeable bunch so why not get in touch for a chat. You can always contact Building Compliance Testing with any questions through phone, email or our online chat service.
Don’t worry, we don’t charge for advice given over the phone, so why not ask for a free quote?